Frequently Asked Questions - Edge 20M Solar Strip Light - Warm White 960 LEDS

We do not currently sell an extension cable for this product, sorry. 

These are not programmable I am afraid, they will only turn off at dawn. 

Hi, 

We do not supply extension cables for the Edge lights. 

You would not be able to connect the remaining to the panel I am afraid. It will cope with the bend, but please make sure you measure and are hapy with the look before cutting. 

LED strip is 12mm wide. 

The panel is 44cm long and 36.5cm high

These cannot be extended I am afraid. 

Hello,

The measurements between the panel and the first light is 1.75m.

Hello,

Unfortunately, we do not sell them seperate. 

Please email us for assistance [email protected]

Hello.

I am sorry to hear that!

Each strip is made with its own specific solar panel so any size strip will work all year round as long as the solar panel is in a good south-facing position or as close as.

Hi Joss, 

You would not be able to use the piece you have cut off. If you would like two 10m strips, the Edge lights do come in 5, 10 and 20m lengths. 

These lights have cut marks at 165mm intervals, so you would need to measure before cutting to see whether you can achieve what yo uare hoping too with the step lighting. 

3mm, the lights are decorative and therefore we aren't able to provide the lumen rating, the solar panel wattage is 4w. 

I would not recommend this application for the lights, please do have a look at our brick lights for this application. 

this is not possible I am afraid!

Hi Rog, The measurements between the panel and the first light is 1.75m and the panel is 44cm long and 36.5cm high

Hi Eddie, the panel is 44cm wide and 36.5 high. it would come with crews and wall plugs 

Hi Betsy, We dont see why not 

Hi Alamap, Thank you, the panel is 44cm long and 36.5 cm tall. the cable from the panel to the light is 1.75m

Hi Paul, 

You can install the strip using the included transparent mounting brackets or outdoor adhesive strip.

The light is diffused and not pointed exactly, it can be cut to length in particular increments indicated on the light with 2 metal tabs. You can attach it using the adhesive strip on the back, or reinforce it with cable tacks. 

Hi James, The lights do have an adhesive strip to stick on to surface or wall plugs, doesnt have to be straigh lines it can bend around corenrs just not very sharp ones 

Hi Philip it is a flexiple strip it has an adhesive that can stick to surfaces as well as wall plugs. The panel size is 44cm wide and 36.5cm tall

Hi Debbie, The strip has an adhesive to stick to surface but also comes with wall plugs