Yes it can be pointed downwards and secured in place.
Hi Steve, The light fitting would be with just two screws. The Sola panel woud require also 2. all provided. The panel is 22cm wide and 14cm tall
The sensor has 120 degrees detection angle.
It is ok if panel gets wet, as the water will run off it.
As these are sold as one unit sadly there are no spares. however if you are having any issues please email [email protected]
That is correct, there is about 10% drop in each extension. They can be found here
No motion cannot be deetected behind the light.
5 metres between the panel and the light.
I am afraid at this time we do not sell batteries for the EVO SMD PRO.
The range of the motion sensor is 8m so we would suggest 6-8m max depending on how much of an area you would like the light to be triggered in.
Mice would be too small to trigger the light unless they were able to get very close to the sensor.
Hi Barry, I have this light in my garden and lights right to the end, some 90 feet but the closer to the light the more powerful. It's very subjective and depends on ambient light and what you are lighting. My decking reflects loads of light vs the grass. The Pro and Elite revisions are much brighter so it depends on what you are looking for. Please contact us for any advice to suit your needs.
We only have the lamp available in black.
The light becomes active around dusk. You can't change the setting but you can change the position of the panel. We always recommend the panel to be south facing to get the most light during the day.
The SMD range isn't designed to be added to. You could, of course, add to it yourself but it would invalidate the warranty. Our GEO kit range is designed for you to added whatever you want, radios, lights etc See our solar lights kits here
Theoretically yes, however, we wouldn't recommend it as it may introduce water ingress issues and would invalidate your warranty.
It's based on the minimum setting of 15seconds. From a full charge, the light could stay on up to 125mins.
Yes, the solar panel can be installed on vertical or horizontal surfaces.
Sometimes this will happen however we bulid in lots of redundancy to ensure this shouldn't cause any issues. As always if you having problems with your light please contact us and we'll get you up and running asap.
Yes, we've had no heat related issues with these lights.
Measures 135mm x 220mm x 20mm
8m from the front of the PIR sensor.
It is 350 lumens.